Im doing alot in the cab with the rewiring of the truck and its annoying with the shifter in the way. How do I go about removing the shifter off the top of my 435? I know I have seen it in the past, but I can't find it with the search. Thanks!
-Greg
jakerboy
10-26-2009, 11:48 AM
Just push the cup down and turn .
bherder
10-26-2009, 12:52 PM
Cutting torch.
:D
(Diver made me say that..)
3834B
10-26-2009, 02:22 PM
I always used a large set of water pump pliers set open to the width of the retainer. As stated push down and rotate. If memory serves me I believe it is counter-clockwise. It's only going to take about an 1/8 of a turn.
You can also use two large flat blade screw drivers as well.
DiverDwnPowrRam
10-26-2009, 03:28 PM
he he he nice one Bruce...by the way i did use a cutting torch on mine, but that was to install the 3" section due to the lift. i was thinking of you brotherman as i did it...
