I plan on getting a lift and level it out , but the silver 20's had to go, are they ok looking?? I got them REAL cheap.....140.00 each,with 20 locking lugs.. later I will put more agressive tires, the difference of my 99's wheels is amazing :)
dizzyD
07-22-2009, 12:56 PM
Nice
Blackzilla
07-22-2009, 04:45 PM
:tup::tup:
Adidas_kn
07-22-2009, 10:07 PM
Not bad man. Now get em put on with your OE TPMS sensors.
LaidNeon
07-23-2009, 12:10 AM
very nice
Z mann R2
07-23-2009, 06:54 AM
what silver 20's??
BULLRAM
07-23-2009, 09:13 AM
The 09 has silver painted rims, and I am changing them out, the wheels in the first picture, is a comparison of the 99 to the 09, just showing the difference
Hemi247
07-24-2009, 10:13 PM
Lets see some pics with them on!!
Doc Fluty
07-27-2009, 01:43 PM
updates?
BULLRAM
07-27-2009, 02:21 PM
Nothing yet.....I want to put them on this weekend, dont really want to just leve it there, too many stories............
Hemi247
08-01-2009, 04:35 AM
Can't wait to see pics!!
BULLRAM
08-03-2009, 06:58 AM
Well.talk about wishy--washy, I put the rims up to the truck for the last time, I dont like them, too busy for this old man, I am going to put them on Craigs list and trade for chrome "(PLASTIC") clad stock wheels, I just want something a little less BLING, shouldnt have bought them ,but oh well.........
mydak
08-03-2009, 07:10 AM
I like the ones you have already.
BULLRAM
08-03-2009, 08:52 AM
I do in a way but ,I am Cajun and we like CHROME..so they are on CL.
Ciguitarguy
08-03-2009, 09:51 AM
yo
Blackzilla
08-03-2009, 09:23 PM
heres a few mite look good.
Blackzilla
08-03-2009, 09:26 PM
all wheels will fit http://www.bigwheels.net/
joePA
08-06-2009, 01:54 PM
Those wheels are very similar to the ones currently on my silver Tona. I had Earnhardt JR black chrome Tank wheels but the finish started peeling. I thought they were to blingy but everyone else says they like them............
joePA
08-06-2009, 02:13 PM
Dirty truck and wheels - but might give ya an idea of what it would look like....
BULLRAM
08-06-2009, 02:24 PM
Thanks Joe that was nice of you, I sold them today, and now i am looking again, narrowed it down a little, buit so many to choose from, 5 star ,6 star 7/8/9/10
joePA
08-06-2009, 02:39 PM
Thanks Joe that was nice of you, I sold them today, and now i am looking again, narrowed it down a little, buit so many to choose from, 5 star ,6 star 7/8/9/10
LOL - like trying to pick wallpaper. The eyes glaze over after a while. ;)
Love the SRT/nightrunner dark ones.
BULLRAM
08-07-2009, 07:27 AM
Aint that the truth..WELLLLLLLLLL..the rims didnt sell ,I posted to Blackin about a trade but he is 4 hours away, I went to Discount tire, they WILL trade me for any of there rims that are priced the same,(AND THEY ARE GIVING ME RETAIL), so that is a good thing, I picked some out and then foud out they were 8.5 instead of 9", and later I will be buying larger tires, so I didnt get them,so I go today again to see different ones, unless Blackin and I work out something, do you think it is dumb to get the clad ones instead of all metal chrome ones?,
joePA
08-07-2009, 08:54 AM
do you think it is dumb to get the clad ones instead of all metal chrome ones?,
Lots of folks hate the clad ones. I was never sure why. There is lots of plastic on these trucks---what's a little more???
They are easy to keep clean. But most swap them to be different. My factory clads with bald tires are going back on before I trade it.
BULLRAM
08-07-2009, 10:59 AM
OK heres a problem , the wheels I like are only in 8.5 or 10 inches, mine being 9 inches, I know how to read a ruler, but are there any problems going with 10 inch rims on our trucks, with stock suspension, 2wd
Blackin
08-07-2009, 11:47 AM
PM'd you BULLRAM.
joePA
08-07-2009, 11:47 AM
OK heres a problem , the wheels I like are only in 8.5 or 10 inches, mine being 9 inches, I know how to read a ruler, but are there any problems going with 10 inch rims on our trucks, with stock suspension, 2wd
Trust me Bro, I'm not an expert on this stuff. I couldn't even get an answer from the dealer as to the dimensions for the 4th gen factory wheels.......
The aftermarket wheels I have are 5x5.5 bolt pattern; 4.25 hub; +18 offset; 20 X 8.5 wheel. I was told by a 4th gen owner that they will fit the new truck.
As far as 10" wide I must assume it would depend on the offset. Not enough and they will rub, too much and they will stick out too far (perhaps).
Getting info was very frustrating--------:banghead:
Hopefully someone else is more informed than I. Good luck.
BULLRAM
08-07-2009, 12:02 PM
Man you are so right.... I thought I wasnt picky but these things are all starting to look the same..... (IAM TRYING TO FIND FLAT 5 STAR RIMS THAT DONT LOOK too WILD)...2 new rims from Liquid come in 20x9 for our trucks, Dyno and Coil
here are the wheels LIQUID COIL FIRST
joePA
08-07-2009, 12:08 PM
I like the top one, but it ain't my truck.......;)
BULLRAM
08-07-2009, 12:14 PM
That is the one I picked.......the other ones all come in 8.5, man I cant get that out of my head, if I want bigger tires , I am stuck, if I get the 9's it will be fine
Blackin
08-07-2009, 12:17 PM
If those bottom ones weren't angled right there at the lip, I'd really like those.
BULLRAM
08-07-2009, 12:27 PM
We think about the same, I was wondering how strong those are??, looks like it could break right there?
BULLRAM
08-11-2009, 10:42 AM
OK. I picked the wheels....i got the liquid Metal Coil, they look great, but I am still wanting to trade for OEM, chrome clad 09 dodge ram wheels, the 5 star, I realize that the new wheels are better, I just like OEM stuff, sooooo, if any body is taking theirs off and wants aftermarket rims, let me know in Texas, near Houston, if not I will just put them on.
KC_Metal
08-11-2009, 10:56 AM
heres a few mite look good.
Nice rims Blackzilla. :rck:
td_20
08-11-2009, 11:43 AM
He is something you might like.
http://www.alcoa.com/alcoawheels/north_america/en/fsw/driver/light/lt_proSeries.asp
Did you say that Discount Tire was willing to trade your Factory wheels for Aftermarkets? What was the retail price on our Silver 20" 5 Spokes? I believe I have the same wheels/tires as you. I'd love to do this. Hook me up with that Discount Tire store here in houston.
BULLRAM
08-12-2009, 05:13 AM
No I bought the V-drive first wheels from there warehouse, and they are going to trade me for something else I liked, didnt have to return them to the warehouse, so they are willing to help.
KC_Metal
08-12-2009, 08:52 AM
No I bought the V-drive first wheels from there warehouse, and they are going to trade me for something else I liked, didnt have to return them to the warehouse, so they are willing to help.
Sounds like a good company to deal with. :tup:
bvigne01
08-31-2009, 07:42 PM
where are you located? I might be willing to work a deal to trade my crome clad rims
joePA
08-31-2009, 08:30 PM
I'm just getting prices on the TPMS stems for my 20X8.5 American Racing rims from the traded '05 Tona. I put the factory wheels and bald tires back on for the trade.
Think I'll throw them on the new ride sometimes. Dealer was talking almost $40 per stem. Sure I can do better with some other contacts I have. Selling the rims and tires is a PITA. Too hard to ship and the tires are barely used.
And I saw the Alcoa rims on an '08 SuperBee. Think they were factory on some models. Man, they were SWEET.
BULLRAM
09-01-2009, 05:31 AM
I traded my rims..and got the chrome clads, thanks for the offer, I like how easy they wash up.
