I am guessing that is 35's. But it is very hard to tell!
Either way, looks SEXY!
07HEMI09
03-11-2009, 02:27 PM
mine is sexy... ill take a pic tonight...
Helevitia
03-11-2009, 02:41 PM
35's
jake09
03-11-2009, 02:42 PM
6 inch with 37s
LaidNeon
03-11-2009, 07:12 PM
too high for me haha
wyat72
03-12-2009, 01:10 PM
I'm just going to say it is a good looking truck.
JBostick
03-14-2009, 06:47 PM
id say 37s
Z mann R2
03-16-2009, 07:51 AM
mine is sexy... ill take a pic tonight...
ok? soooooooooo?????? where are they?
07HEMI09
03-16-2009, 09:13 AM
here goes my pics..
keith43
03-16-2009, 09:36 AM
damn this truck is sexxxxxay!!!!!!
http://i39.tinypic.com/3090oc1.jpgAgreed!! There is a black/silver one like that at my local dealer, not lifted though. Stopped by Friday and looked at it and a salesman came out and said...I can make you a heckuva deal buddy... I said I bet you can but, I like not having a payment right now. But after seeing that pic it sure makes a fella think.
moparman2k2
03-17-2009, 03:05 PM
Nice
LiftemHigh
03-18-2009, 12:37 AM
Im lucky enough to drive by the Fenton, Mo. assembly plany everyday to get my fix of the new Rams. They set a new truck out everyday. :2444_drooling:
dman782
03-18-2009, 06:26 AM
that is one of the best looking trucks i've ever seen
Wichita
03-31-2009, 06:18 PM
Badass 09 truck!
04Ram2500Hemi
04-12-2009, 10:38 AM
Good looking 1500 for sure. Stock height 1500's just look too low to me. Heck, stock height 2500/3500's look too low to me though too. Must be some sort of theme.
keith43
04-12-2009, 10:55 AM
Very nice truck 04Hemi24!!!:tup: I just got done removing the door handles on my truck and removing the chrome covers and painting the handles black...BIG improvement. I still have to do the t/gate handle and was considering going with the ram head emblem on the t/gate and after seeing your pics I think I will. So if anybody has one off an 05 to 08 feel free to send it my way!!!
tones2SS
04-20-2009, 01:05 PM
damn this truck is sexxxxxay!!!!!!
http://i39.tinypic.com/3090oc1.jpg
Now that,... is a NICE TRUCK!!!!
WOW!!:gr_patrio:rck:
hemisphere2
07-13-2009, 08:35 PM
6'' with 37's
silverhemidan
07-13-2009, 08:41 PM
http://www.superlift.com/Catalog.asp?V=126
another one by BDS
http://www.youtube.com/watch?v=mwbx82JbNJ0
here is a red one.........:D
hemisphere2
07-13-2009, 08:50 PM
Here are some pics of my weekend project, 6'' pro comp 325/65/18 nitto's.
Here are some pics of my baby!!
http://i602.photobucket.com/albums/tt110/HEMISPHERE/09ram004.jpg
http://i602.photobucket.com/albums/tt110/HEMISPHERE/09ram001.jpg
http://i602.photobucket.com/albums/tt110/HEMISPHERE/09ram009.jpg
http://i602.photobucket.com/albums/tt110/HEMISPHERE/09ram008.jpg
http://i602.photobucket.com/albums/tt110/HEMISPHERE/09ram007.jpg
hemisphere2
07-13-2009, 08:55 PM
sorry posted twice!
LadyRam09
07-21-2009, 11:18 AM
Nice!
Sexy and shiney.
Can't lift mine or it won't fit in the garage.
TruckEnthusiast
07-22-2009, 05:27 PM
It is a great looking truck although I think lifted Rams look better monotone.
studlee
07-23-2009, 05:40 AM
Nice!
Sexy and shiney.
Can't lift mine or it won't fit in the garage.
my thoughts exactly.
my limiting factor is the garage door height.
j-rich
07-23-2009, 10:48 PM
are then 35s? and what size lift u got?
DodgeOrDie97
07-23-2009, 11:11 PM
Dude, Wow. That just looks awesome! One best I've seen lately easy!
hemisphere2
07-24-2009, 04:20 PM
are then 35s? and what size lift u got?
Yes, they are 35'' nitto terra grapplers on pro comp wheels, with a 6'' pro comp lift.
ChryslerTech
07-28-2009, 10:13 PM
Yes, they are 35'' nitto terra grapplers on pro comp wheels, with a 6'' pro comp lift.
I'm going to be installing the same lift shortly. Did you have to do any modification to the exhaust to clear the front driveshaft?
cpelton
07-30-2009, 04:16 PM
4" and 35's. 37's would fit on a 4"
http://img.photobucket.com/albums/v133/cpelton/truckatwork1.jpg
http://img.photobucket.com/albums/v133/cpelton/lift2.jpg
Doc Fluty
07-30-2009, 04:42 PM
now.. thats a nice truck...
i shoulda got the blue... damn
04Ram2500Hemi
07-30-2009, 04:44 PM
4" and 35's. 37's would fit on a 4"
http://img.photobucket.com/albums/v133/cpelton/truckatwork1.jpg
http://img.photobucket.com/albums/v133/cpelton/lift2.jpg
Wow- Good Looking Truck!
mojoman
07-31-2009, 12:14 AM
Wow- Good Looking Truck!
I like that blue color.
hemisphere2
08-01-2009, 12:29 PM
[QUOTE=ChryslerTech;3143507]I'm going to be installing the same lift shortly. Did you have to do any modification to the exhaust to clear the front driveshaft?[/QUO
The only thing I had to adjust was the exhaust, by flexing the pipe to give it an extra 1/4'' of clearance, it only had a 1/4'' so now it has a 1/2'' clearance for engine flex before it would touch the drive. Just be gentle if you have to tweak your exhaust, to make sure u don't mess the doughnut gasket up on the manifold. Good luck on the install, took me about 13 hours by myself, making sure everything was right, and I had a little trouble getting one bracket aligned on the rear 4 link. Post some pics when done!!
Hemipwr07
08-02-2009, 02:47 PM
check it...lift from dodge fits 37s. pretty tight write up
The lift is only a 4". I wouldn't put 37's on a 4" lift.
mattyb777
10-30-2009, 08:49 AM
The only thing I had to adjust was the exhaust, by flexing the pipe to give it an extra 1/4'' of clearance, it only had a 1/4'' so now it has a 1/2'' clearance for engine flex before it would touch the drive. Just be gentle if you have to tweak your exhaust, to make sure u don't mess the doughnut gasket up on the manifold. Good luck on the install, took me about 13 hours by myself, making sure everything was right, and I had a little trouble getting one bracket aligned on the rear 4 link. Post some pics when done!!
what do you mean by flexing? How did you do it exactly? mine is getting installed soon and I want to inform the mechanic about it.
Is it mentioned in the Pro-Comp installation instructions?
thanks in advance,
matt
DiabloRAM
10-30-2009, 08:59 AM
Im lucky enough to drive by the Fenton, Mo. assembly plany everyday to get my fix of the new Rams. They set a new truck out everyday. :2444_drooling:
I get to drive by Fenton plant about once a week and it is cool to see the trucks out there. Too bad Dodge closed this plant and not the ones in Mexico or Canada. Glad all that stimulus money kept workers in other countries employed and displaced families from around Saint Louis. I made sure when I bought my truck that it was made in the USA. Off topic but needed to be said.
hemisphere2
10-30-2009, 02:09 PM
what do you mean by flexing? How did you do it exactly? mine is getting installed soon and I want to inform the mechanic about it.
Is it mentioned in the Pro-Comp installation instructions?
thanks in advance,
matt
I mean that I had to tweak or slightly bend the exhaust coming off the exhaust manifold to get enough clearance away from the front drive shaft. It had about 1/4 '' clearance so I adjusted it slightly to give it about 1/2''........but because the front differential doesn't move around when driving, 1/2'' is plenty IMO.........worst case is you will need a exhaust shop to bend and weld in a new short piece for clearance like CPELTON did to his......but you may need to do nothing at all to it.........I just used a 2x4 to pry against the frame and exhaust.
Crawler Hauler
10-30-2009, 06:29 PM
I get to drive by Fenton plant about once a week and it is cool to see the trucks out there. Too bad Dodge closed this plant and not the ones in Mexico or Canada. Glad all that stimulus money kept workers in other countries employed and displaced families from around Saint Louis. I made sure when I bought my truck that it was made in the USA. Off topic but needed to be said.
I hear ya.
jackstruck
11-08-2009, 10:19 AM
Now that,... is a NICE TRUCK!!!!
WOW!!:gr_patrio:rck:
:dropjaw::dropjaw::dropjaw::dropjaw: its so sexy man its blown me away :rck:
