trickmysrt4
02-02-2009, 08:54 AM
ok i was wondering what i have to do to run boost strickly from the wastegate and not from the pcm. I dont know if i worded that correctly but someone on here should know what i mean. I spike right around 18 and it drops as low as 14 if i am correct that is the computer making it fall that far down just want some info could be a boost leak also i havnt checked for any in a long time i have stage 2 and bolt ons
gotmysrt4
05-01-2009, 04:11 PM
if I'm correct, all you gotta do is disconnect the red line. if that doesn't work, disconnect the tip sensor, as well.
doode, the stage 2 should be able to put you 'round 20-22 lbs. and it falls 'cause of how the turbo's designed,....it's not capable of holding that much boost steady. but yes, boost leaks are your mortal enemy.
Ram Dude
05-30-2009, 12:54 PM
This is what you do to rum off non PCM controlled boost. Disconnect the green line off the back of the turbo and the black line off the W/G and cap both of them. Then you run a new line from the W/G to where the green one was connected. Finally tune your boost.........
