i can't figure out where to put the brake hoses all the hoses can fit in any hole, it is a 98 dodge voyager this picture was taken on the driver side front wheel um yea if theres anyone out there that can help it would be greatly apreciated
thank you!!!
mr_can'tfixit
dlm4ut
01-06-2009, 12:24 PM
For the 96 Caravan the connections to the Hydraulic Control Unit it is as follows going from left to right
Left Front Wheel
Right Rear Wheel
Left Rear Wheel
Right Front Wheel
dlm4ut
mr_can'tfixit
01-06-2009, 12:48 PM
um yea thank you very much and by any chance you know what the other two holes are for?
acton mike
01-07-2009, 06:05 PM
a lesson here - and this is not meant to be a lecture- the lesson is to make notes or sketches and to label things when we take them off
having said that, I pulled the components of the front end of the 318 in my '84 D100 to change the timing chain and I am scratching my head as I try to sort out what bracket goes where
I must practice what I preach
I had intended to take some digital pictures but I had left the camera in the house and was too lazy to run in and fetch it - I intended to put everything back the same day and what idiot cannot remember where things go
But it was Christmas time and one thing or another got in the way and a few weeks later I am getting around to putting things back together