I just bought some new PIAA Headlights for the car, and for the life of me I cannot get the headlight out. I took out the 2 headlight screws and the front bumper screws but I can't pull the headlight out enought to get the bulb out. I tried pulling really hard but I got scared and thought I might break the plastic front bumper because it started to bend. Thanks for any help.
lrl1990
04-14-2004, 07:38 PM
Doesn't anyone know. The headlight keeps getting caught on the front bumper.
Grey02Sport
05-30-2004, 01:10 AM
Yes but I'll assume you already know since it was April when you posted this. Just in case you don't, when I did my wife's SRT we had to remove the (4) screws holding the front fascia then pull the fascia carefully forward then remove the headlight. What a pain in the A$$! We did the fogs at the same time because I would never be able to get my hand to the fogs from the underside. The passenger fog required me to remove the horn so I could get my hand in there.
