I put my carb on my manifold tonight after a long rebuild. Can someone post picture of their carb linkage I am running a edelbrock intake and have a 360 hooked to a 727. Also anyone have any pics of the mounting points for the lokar kickdown linkage. I would greatly appreciate it.
Thanks...Gavin
B-300
06-10-2008, 12:14 PM
The Lokar kickdown cable is designed to mount on the left side tranmission bolt next to the rear cooler connection and comes with a bracket for this. It sweeps rear and over the transmission to the engine in a loop and can be mounted at the left rear carb bolt. (I think it has a bracket for this also.)
I don't have pictures.
77Utiline
06-23-2008, 04:58 PM
Just remember the Lokar instructions are written for OEM components which tend work the opposite way from aftermarket/ performance
B-300
06-23-2008, 05:59 PM
I didn't think of that since lokar kickdown is a cable it will need to be pulled on. The throttle cable will connect above the throttle shaft, the kickdown cable about 1" below the throttle shaft.
What type of carb are you trying to connect to?
ramitupurs84
06-23-2008, 07:34 PM
As of right now I am all squared away with it, thanks all!
