Need some info

[tnheadduck]

Hey all,
new to the site but I here this is the place for info on Dodge stuff, looking at buying a 1979 w100 4wd and was just wondering what type of axles and ratio and transfer case it might have in it it is a 360 motor with a 727 torque flight tranny and looks to have full time hubs thanks for any help in advance

jason

[Delray Dude]

Dunno that much about the 4WD units, but sounds like a cool truck and if it's un-molested usually the axle will have a gear ratio tag stuck on one of the bolts - might be a bit dirty and need a little cleaning, but worth a look-see

[fal308]

The transfer case, if original, will be a 203 There should be a tag on it all.
The axles, again if original, will be be a Dana 44 front (passenger drop) and a Chrysler 9.25 in the rear. Gearing could be anything from 3.21(?) to 4.10, most likely a higher (numerically lower) gear.

[Speed Dragon]

Probably 3.55 gears.