Few pics of my train wreck called a rebuild..

[demon217]

http://i5.photobucket.com/albums/y184/217zenki/Picture001-1.jpg
My trusty work bench .. 64 impala trunk lid.. :thatfunny
http://i5.photobucket.com/albums/y184/217zenki/Picture002-2.jpg
360^
http://i5.photobucket.com/albums/y184/217zenki/Picture003-2.jpg
360^
http://i5.photobucket.com/albums/y184/217zenki/Picture007-2.jpg
318^
http://i5.photobucket.com/albums/y184/217zenki/Picture005-3.jpg
What and where do these go? ones from the 318 and ones from the 360.. I cant remember where they went but I know they went somewhere.. lol :help:
http://i5.photobucket.com/albums/y184/217zenki/Picture004-2.jpg
Whats the proper way for the intake gasket? I have both of these and they both are exactly the same? The exhaust ones are totally differnt.. :help:
http://i5.photobucket.com/albums/y184/217zenki/Picture006-2.jpg
Extra crap anyone need it?

[84 Ram]

The two pieces that you have in the picture that you are asking what they are are supposed to go behind the bolt with the hole in it on the cam wear plate. Oil drips out of the hole in the bolt onto this piece and it makes the oil travel onto the timing chain.
The two metal pieces go in the upper left bolt hole but, it doesn't have to use a bolt with a hole in it. I guess that chrysler had three ways of lubricating the timing chain (ie bolt with hole in it,slinger, and the method that is used on your block. In the link that I last give you if you read the page above where it shows the cam bolts it tells about the drip rail that you have.

[demon217]

Ah ha got cha..

[84 Ram]

I edited my last post check it out

[demon217]

Alright thanks a bunch..

[demon217]

What about that intake gasket does the thin metal one go on top of the paper??

[84 Ram]

You only use one or the other. Speed Dragon said he liked the metal gasket, I prefere the paper gasket if it is Fel-Pro. I am sorry for giving you the run around on the cam bolts it has been a couple of days since I built a small block I could just remember that there was something that oiled the timing chain. I guess that you can look at it this way it brought attention to te drip rail so now you know what it is.

[Speed Dragon]

You only use one or the other. Speed Dragon said he liked the metal gasket, I prefere the paper gasket if it is Fel-Pro.

Every intake leak I've seen has been w/ the paper. Granted, they've usually been 15-20 yr old gaskets too.

[DiverDwnPowrRam]

Nice color...put a few more cans on it after you get er all together and it will look like a crate...nice work. Here is a link on my build earlier this year
http://www.dodgetalk.com/forums/showthread.php?t=152002

[demon217]

Looks good..