Alright I asked before but for a 318 .. I need torque specs for a 360 I dont want to gamble on using the 318 specs if there is a possiblity there not the same..
So I need torque specs for Heads, Rocker arm shafts, Main caps , Rod caps, oil pump and Im pretty much thinking thats it... Its a late 70's early 80's 360.. Thanks..
62savoywagon
10-24-2007, 08:16 PM
If I remember right. Speed Dragon will have that info for you.
Speed Dragon
10-24-2007, 08:22 PM
360's use the same torque specs as a 318. Lol I never torque rocker shafts, just hand tighten. I think they are like 20 ft lbs. Heads are 85, intake is 40, oil pump and mains I'd have to look up, I usually just hand tighten the pump also.
Looks like I was off, 340's and 360's are 95 ft lbs on the heads.
demon217
10-24-2007, 08:27 PM
Awesome.. Google always owns my ass.. lol
84 Ram
10-24-2007, 09:31 PM
Leave it to Speed Dragon to come up with about any info that is needed.
B-300
10-24-2007, 10:39 PM
Rods are 45 ft-lbs for stock bolts, 50 for ARP bolts.... ARP bolts are higher quality and can take the additional torque.
Speed Dragon
10-25-2007, 12:13 AM
Rods are 45 ft-lbs for stock bolts, 50 for ARP bolts.... ARP bolts are higher quality and can take the additional torque.+1, if you use any ARP fasteners, call and ask them about torque specs, they're usually different from stock.
Speed Dragon
10-25-2007, 12:14 AM
Leave it to Speed Dragon to come up with about any info that is needed.Lol, well I've used most of the info I post enough, I should be able to do it in my sleep :D
62savoywagon
10-25-2007, 07:16 PM
Just like walking and talking at the same time there, heh!!
B-300
10-25-2007, 10:15 PM
I thought that was walking and chewing gum at the same time that some people couldn't master.
62savoywagon
10-26-2007, 04:41 PM
Some people have PROBLEMS doin both, don't you know!!
