Source or part number for soft brake lines [Archive] - Dodge Talk Community Forum


Click Here to Visit The Planets Largest Dodge Enthusiast Community




PDA

View Full Version Of This Page : Source or part number for soft brake lines


rolnblok
10-22-2007, 08:50 PM
I am going through my front brake system on my76 W-200. NAPA only had part numbers for the soft lines to the calipers. Now I need the soft line from the front cross member to the axle. I have been looking around and am having troubles locating this line. Any ideas on a source or part number I can try to cross at the local NAPA/Carquest/Checker/O'Reillys??

Thanks for any assistance you can offer.

Megunticook
10-22-2007, 09:07 PM
I have a slightly different truck (73 W100) so don't know if this is helpful, but last winter I installed a NAPA 36650 hose in that position. It actually seemed a bit short to my eye, but I'm no expert--just seemed like the bends were a little tight, but it did fit OK.

Maybe safest bet is to remove the old one, cap your lines, take it to the parts counter, and match it up.

Good luck.

Chump
10-22-2007, 09:45 PM
This was an oversite in the catalogs. This one is 13.25"long at NAPA...see if this is what you need. Get back to me if it isnt what you need.
Item#: UP 38090

http://partimages2.genpt.com/partimages/313626.jpg

acton mike
10-22-2007, 09:45 PM
that is the best idea - physically match it up with another hose

if offered a choice, go longer (within reason mind you) rather than shorter

rolnblok
10-23-2007, 09:43 AM
Thanks Chump. That one looks like a match. I will take my old one to NAPA and have them pull that part number and see if it is indeed a match.

Chump
10-24-2007, 11:56 AM
Let me know how you make out. I believe 74 or 75 was different, been a long time since I researched this. My 77 is the same as your 76.

rolnblok
10-25-2007, 06:18 PM
Chump,

I was able to swing by NAPA today. That part number (UP 38090) is correct for the front center soft brake line that runs from the cross member to the front axle.


Thank you for the part number.