1972 w200 steering solution

[jick]

hi am having problems linking up steering,could somebody pls advise me if this set up will work

steering column one piece shaft has rag joint too steering box.
steering box saginaw708 power steering mounted directly too frame.
font axle dana 44/3ef open knuckle.
trouble is mounted as above leaves me needing a drag link arm around 14" long this i seem unable too find is this standard set up for power steering on 1972 w 200???

[Speed Dragon]

Should be the same from '72 up to at least '80 for all 4x4's.

[Chump]

Steering box can't be mounted directly to the frame..you need the plate/bracket that mounts to the frame and then the steering box mounts to it. The pitman arm could be the wrong one also or mouinted on the splines wrong if it's not keyed. Maybe the box is incorrect? I'll take a pic of my 77 when I get a chance to show you the position the pitman arm is clocked.
Is there a part# on the pitman arm?

[Chump]

Couple of other threads for info.

http://ramchargercentral.com/boards/index.php?topic=93713.0
http://ramchargercentral.com/boards/index.php?topic=94691.0