01 AWD Bump Stop replacement

[joedakota]

I lost a rear bump stop and need help with how to replace it. These are yellow cones about 5-6 inches long that stop the rear from slamming into the under carraige. There are no bolts showing and the plate that is still there with some of the rubber on it has the brake line attached. There is no mention in Chilton's or online. Thanks

This site has been a big help with this GC and my Dakota. Thanks to all that respond!!!

[mfahey]

I'll say up front that I'm not familiar with the Chrysler ones but on my Camaro, there was a plate and bolt arrangement molded into the stop. You then had to access the bolt from above to get a nut on it.