I have searched the threads here and in my chiltons,I can't seem to find it.
I put a new heater blower switch in and checked to make sure the blower motor worked(which it does). Where can I find the resistor and how do I repair it?
Speed Dragon
07-24-2007, 07:54 PM
It's screwed to the heater box on the pass side, behind the dash. Has a 2-prong plug.
old tired rebel
07-24-2007, 07:57 PM
Thanks Speed, Can I get through it from the glove box?
DiverDwnPowrRam
07-24-2007, 08:22 PM
Both of mine are actually located in the body of the cab, above the firewall on the passenger side held in with two screws. If you do not have A/C you can pull out your glove box insert and using a 5/16 nut driver get the two screws out.
old tired rebel
07-24-2007, 08:27 PM
Both of mine are actually located in the body of the cab, above the firewall on the passenger side held in with two screws. If you do not have A/C you can pull out your glove box insert and using a 5/16 nut driver get the two screws out.Thanks again DiverDwnPowerRam.Luckily I don't have ac.
Speed Dragon
07-25-2007, 10:27 PM
You shouldn't have to open the glove box, you just have to lay on the pass floor and look up.