Hi Folks,
I have a problem with my 2003 GC sport driver side sliding door power lock don’t seems to be working properly there is a little movement but not enough to lock or unlock when using the remote ,Any idea , could it be a faulty actuator ? :help:
Thank you in advance
RickMN
07-01-2007, 11:35 PM
Easiest way to find the problem is to remove the door panel and test the actuator. Disconnect the actuator from the lock linkage and operate the door lock switch. If it works, then your problem is a sticky lock or bent linkage. If the actuator still acts funny, Unplug the connector to the actuator and provide 12V to one terminal and ground to the other. It will either lock or unlock. Then reverse the wires and it will do the opposite. If you still show a problem, disconnec
kossman
07-02-2007, 12:43 PM
Thanks for the tips,
here is some pic's as you mentioned i tested the actuator an yup it is
the problem, Unfortunately since it's long weekend i have to wait till
Tomorrow to go to dealer.