Is this link practical for the Gen-2 Ram Vans? They have a note about it that says, "2006 - At this time we are working on ways to control RWD Dodge 44 / 46 / 48RE type electronic transmissions with an electronic governor without a computer. Stay tuned."
http://www.transmissioncenter.net/SwapInformation.htm
B-300
03-28-2007, 02:57 PM
I have seen this link.. I'm putting a 46rh into my '71 van since there has been no update on this site. I will be using the pressure switches with a relay similar to that shown on how to swap a 727 to 518.
Also I found a place www.powertraincontrolsolutions.com/content-4 html They have a an electronic unit they claim will work for the 42,46,47re series Dodge transmissions.
A note to those doing the 4 spd OD swap. The starter on some dodge trucks is on the right side, down low not the left as on vans... I made the mistake of buying a case to replace a cracked one and didn't know this. Now I'm buying a 2nd case.
--B-300--
