Hi.. here in sweden everyone is pouring down dextron 111 in the transmisson, so my transmisson is full of it.
now i am going to change filter and adjust bands,and wondering if its possible to fill it up with atf 3 ?
I mean the mix must have been in there before,if its ATF 3 from the factory right??
Or is my transmisson going to be left behind on the freeway.. :huh:
Dodgevanman
03-26-2007, 07:19 AM
What year is your van? It wasn't until the early 90's that Chrysler started phasing in their own special fluids. If your van is a newer model, then you should use ATF+3 or ATF+4.
Rastapopoulos
03-26-2007, 12:19 PM
its a 89tbi with the a999 transmission.
According to service manual ATF+ type 7176 is the oil to apply.
And here the problem starts,every one is filling the transmission with dx3 in sweden.so when i purchase the van it was dx3 in the transmission.
now i am going to change filter and wondering if its possible to fill it up with atf+3?
Dodgevanman
03-26-2007, 02:12 PM
Sure you can. ATF+3 is just an updated version of Type 7176.
Rastapopoulos
03-26-2007, 05:59 PM
I have heard that dexron 3 and atf+3 not blends god??
i can only thange the oil in the pan and radiator, so there going to be dexron 3 left in the transmission.
i am going to drop the pan a couple of times to get rid of dexron 3.
