I was going to change the plugs when I noticed alot of oil leaking around the plug seal on the valve cover. Bought a new gasket but how do I get the oil from around the plug I'm talking about 3/4" deep!!
dodgeneonACR98
01-26-2007, 06:46 PM
You may need to take the valve cover off and replace all your plug gaskets along with your valve cover gasket. Thats what I would do. Good Luck!
HoodooGuru
01-26-2007, 07:14 PM
Take the cover off and install new cover gasket and plug seals.
Dead cheap parts and easy to do.
Should not take long at all.
Then all done and dusted!
scottrachel01
01-26-2007, 08:30 PM
The plug seals came with the kit.How do I keep all that oil from going into the cylinder when I change the plugs? The oil is 3/4 to an inch deep in the plug tube.
alaskaneon
01-26-2007, 10:15 PM
use a turkey baster and suck it out
95moparracer
01-26-2007, 11:16 PM
that or paper towels lmfao... stick the paper towels or turkey baster in there and get it then change ur spark plug arfter u get it all out! then take ur valve cover off its like 10 bolts on the top! also might wanna get some sorta silicone or w/e to hold the gasket in! easy to do takes all bout 10-20 mins and only trickey part is getting the gasket and cover back on without messing it up :P! if u dont use some sort of silicone it will leak again~
alaskaneon
01-27-2007, 03:11 AM
just don't replace the turkey baster back in the kitchen drawer. :D
scottrachel01
01-27-2007, 08:56 AM
Thanksgiving is 10 months away it'll take my wife a while to realize it's missing!!!! Thanks
dodgeneonACR98
01-27-2007, 10:16 AM
Thanksgiving is 10 months away it'll take my wife a while to realize it's missing!!!! Thanks No that means you got 10 months to replace it! Just think how mad she will be 10 months from now when she needs to baste the bird and the baster is coated with motor oil and in your tool box.LOL Thats suicide! Buy your self a $3 replacement and spare yourself the agony! LOL
scottrachel01
01-27-2007, 01:00 PM
Just finished that was easy as ya'll said.I had to replace the plug(bosch "crapnums")And also the wires.. runs alot better. It cuts out at 6400 rpm evidently it doesn't have a mopar pcm as I was told or am I not getting enough fuel?Turkey basters are hard to find this time of year I'll have to risk it or better yet blame my 3 year old boy!!!
alaskaneon
01-27-2007, 01:03 PM
No that means you got 10 months to replace it! Just think how mad she will be 10 months from now when she needs to baste the bird and the baster is coated with motor oil and in your tool box.LOL Thats suicide! Buy your self a $3 replacement and spare yourself the agony! LOL
Now that sounds like a man who has been married a while! :D Good call ACR!
dodgeneonACR98
01-28-2007, 05:31 AM
Now that sounds like a man who has been married a while! Good call ACR! Just trying to help out a fellow Dodge Fan. LOL
