this is some general info on what came on the 79 - 80 Snow Plow Package
the code was YC6
it included
Power Angling Blade
Power lift with 7 way control valve
and it MUST have the following equipment:
YW2 - GVW Package - 4800# - 7200#
HE4 - 60 amp Alternator
NE2 - Snow Plow work lights
HFC- 70 Amp Battery
or
HF5- 85 amp Battery
HA8 - Increased Cooling
RAM MAN
10-07-2006, 11:36 AM
the code for 1979 ONLY was YC8
the code for 1980 ONLY was YC9 and they both included the above info
10cylinderRAM
10-24-2006, 07:00 PM
hey was this the "SNO-COMMANDER" my grandpa has one, can't find much info on them.
RAM MAN
10-25-2006, 10:42 AM
This is some general info on the Sno Commmander Trail Duster package for 1978 ONLY
the code is YC6
It included:
Power Angling Blade
Power lift and 7 way control valve (Requires GVW code YW2)
minimum 63 ampere alternator
70 ampere Battery
came with 225 / 318 / 360 engines
Plow lights
Increased cooling
AW100 ONLY
Hope this helps
NeDodgeguy
10-25-2006, 06:05 PM
Where do you find all this info?
RAM MAN
10-25-2006, 08:33 PM
I'm a member at the Chysler musuem for one
;)
plus I have done a lot of research, bought a cabinet full of books and now want to pass on some of the information I have, or have learned
ramman1
10-28-2006, 01:07 PM
What about any info on an 85 W350 Sno Commander pkg?? TIA
ramman1
11-13-2006, 04:47 PM
RAM MAN: Is there any possible way you could get me any info on this 85 W350 Sno Commander? VIN: ##################
RAM MAN
11-13-2006, 11:08 PM
I see what I can track down, but I don't have access to VIN numbers ...
RAM MAN
11-13-2006, 11:11 PM
and because there are "bad guys" out there I edited your post so you VIN number is not available to the rest of the general public, but I wrote it down so I could see if I could track down any other info
