did a swap from2.7 to 3.2 lucked out found a wrecked 2000 intrepid to use on my 99 got everything..radiator exhaust ac alt pow/steer now my check engine light comes on says can't read p/s hi pressure switch well the 3.2 harness has no pressure sw plug and the fender mount power sterring unit has no switch???? i'm missing something does anyone know how to get the light to stop coming on? i'f you have the answer let me know
slammed1
06-20-2006, 07:52 PM
I thought the rack and pinion is where the switch was located??? I am almost done with my swap and havent ran into this prob yet. I am however finding the toughest part is the exhaust not fitting right.............the only place to shorten the pipes to make work is right behind the cat convertors.
nannook22
06-20-2006, 08:14 PM
hi slammed 1 the exhaust i bought used off the wrecked intrpid changed both sides to muffler lucked out there i priced new pipes at autozone $68 a peice with cat conv theswitch i'm talking about on the2.7 mounts on hi pressure line right at pump as far as i know the3.2interpid had no switch unless its on the rack on the 2.7 intrepid there is only the one at the pump the3.2power steering pump has no switch on the line and the tank mounts on the fender. i'll check my rack again to see if i can add switch there thanks nannook22
