kvaldez
05-21-2006, 09:40 AM
How do you replace the inside dash lights for the fuel guage area?
spike6969
09-01-2006, 04:30 PM
Well I have posted this on another section of this forum..Im going to try and do my dash lights all or them..I will let you know when i do this..Ill be doing those lights as well...My car is a (97) intrepid..spike6969
Kimura
04-06-2007, 05:07 PM
That's what I;d like to know...I have a blown light for part of the tachometer as well as the engine temp gauge...I may go to the junkyard and try taking dash apart..If i can figure it out I'll replace my own...it's kind of annoying.
Daytrepper
04-17-2007, 04:38 AM
If its a 98+ its not too tough. The kick panel below the steering column has to come off. There are a few screws holding the instrument panel bezel on (which includes the radio and heater/ac bezels), and a couple clips. Remove the screws, and start above the ashtray and carefully pull the bezel outwards, off of the clips. You will have to unplug the heater controls and the headlight switch, and lower the steering column all the way down with the tilt to get the bezel out. After that, there are 4 screws and 2 plugs on the cluster itself. The bulbs in the cluster can all be removed from the back side of it, by rotating them 1/4 turn. 93-97 is similar.
