Well i am a proud new owner of Black 2004 SRT 4. I love my Car!!! I just love it. I cant say enough good things about this car. But i have a problem, i bought a greddy full auto turbo timer. My problem is in the ignition wiring. I do not know what is what. I called my dealer to get a repair manual, and it costs $170. Can anymore help me out with the igintion wiring system, or give me information on where i can find some help to figure out what wires are what. Thanks to anyone who can help me.
Ninja-Matic
05-02-2006, 07:29 PM
Don't go into the steering column. Too damned small in there. Use the back of the fuse relays. Pop the cover, remove the two screws holding it in and you've got about 14" of wire to play with.
For my TT install (A'Pexi) I placed the ground directly on the screw for the fuse relays - that's perfect. If I remember correctly - the ignition and power you want to go with the # 10 and # 15 wires on the fuse relays. Should be a thick sky blue wire (for your ignition) and thick red wire for your power.
I dunno if GReddy has an anti-theft cutoff, if it does, you'll want the white with black stripe skinny wire on the PASSENGER side of your center console. 1 screw in each cupholder at the base and four screws inside your console - lift up and you'll see a mess of wires. You'll want the ONLY one attached to your hand-brake. Hand brake goes down, car shuts off if key isn't in the ignition.
Drive fast and be happy.
elchicoyes
05-03-2006, 06:19 AM
The ninja is on the money.
95moparracer
10-18-2006, 10:07 PM
lol well i have 3 wires coming off my greddy tt and it dont work... i did it this way and tried it the way on srtforums.com neither worked.... ****ing greddy sux... shoulda went with apexi!
elchicoyes
10-18-2006, 11:39 PM
A tt is a tt. My friend has an off the wall timer, the break wire was the only difference in color. But the red is constant, the green is ignition, blue is...well I don't remember but. It should work as long as u tapped into them right. I have the greddy, never did any electrical work in my life and worked without catching fire after I got done. What seems to be the problem with the timer?
95moparracer
10-19-2006, 01:03 AM
ok my bad it does work lmfao just no where in the instructions does it say u have to back the car up and pull it forward during the "programing shit" lol
