i've been on there site trying to find someheaders which i read they made in a article online and can't find any so i tried to find simply parts for the slant six an came up empty i'm thinking they have quit building parts for this engine but they did stop producing it almost 20 years ago but at the same time the i can still find parts for a 440
Dodgevanman
05-01-2006, 07:21 AM
Yep I think so. Clifford Performance makes stuff for the /6, but I've heard good and bad about them so I don't know.
ramtrax_2k2
05-01-2006, 09:24 AM
http://cliffordperformance.net/
http://www.slantsix.org/
Moparfreak1980
05-01-2006, 01:15 PM
i'm a member of slantsix.org and havebeen to clifford but all i can find is a 3 into 1 set up for duals i'm trying to find a 6 into 1 set up because duals are a pain to run in the ram
Speed Dragon
05-01-2006, 02:48 PM
Mopar probably doesn't carry anything for them anymore except stock replacement parts. There are other things you can make work to hop them up though. Like you can use cut-down LA valves to get bigger valves. At least I think it's LA valves.
Moparfreak1980
05-01-2006, 10:27 PM
well i called my local dodge dealer, canadian tire, napa, auto parts plus, car quest and a place i know of in london called performance unlimited canadian tire wouldn't check their supliers for me i have to go look through all the catalogs they have but the rest are a no not available so i called clifford found they had a toll free number no 6 into 1 available anymore but they do have a 3 into 1 pair with a seperate y pipe
Speed Dragon
05-02-2006, 12:22 AM
If you could get just the flange, you could have your own made. Or for that matter, you could fab your own flange too, especially if you can get a hold of a spare head.
Moparfreak1980
05-03-2006, 05:45 AM
i got a spare exaust manifold kickin around and two spare engines but no faricating or welding skill but my dad has some of both skills
Dodgevanman
05-03-2006, 07:02 AM
Has anyone heard of Doug Dutra? He is a slant six guru and makes his own Dutra exhaust. He splits the factory manifold to accept dual exhaust. It's not 6 into 1 like you were looking for however.
Moparfreak1980
05-03-2006, 10:34 PM
yup have heard of them and found instructions on how to make my own just don't like the thought of cutting one in half when i don't have one to replace it
